NAND Secondary Program Loader Starting U-Boot ... start_pbat_adc *** ======================= 2536 U-Boot 1.1.6 (Jun 30 2009 - 15:41:36) Board: Ingenic PAVO (CPU Speed 336 MHz) DRAM: 64 MB Flash: 0 kB NAND:2048 MiB *** Warning - bad CRC or NAND, using default environment LCD Select:IO_D0=0 IO_D1=0 LCD Type:LCD_AT043TN24 The BPP is 32 PixClock:9333333 LcdClock:28000000 In: serial Out: lcd Err: lcd no menu keypad and right keypad is on! Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x500000, size 0x300000 correctable error counts is 1 correctable error counts is 1 correctable error counts is 1 correctable error counts is 1 correctable error counts is 1 correctable error counts is 1 correctable error counts is 1 3145728 bytes read: OK ## Booting image at 80600000 ... Image Name: Linux-2.6.24.3-ge6f338fc-dirty Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 1673913 Bytes = 1.6 MB Load Address: 80010000 Entry Point: 802e4d90 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... Linux version 2.6.24.3-ge6f338fc-dirty (xiechen@xiechen-xxjxt) (gcc version 4.1.2) #173 PREEMPT Mon Jul 13 10:14:41 CST 2009 CPU revision is: 0ad0024f (Ingenic JZRISC) CPU clock: 336MHz, System clock: 112MHz, Peripheral clock: 112MHz, Memory clock: 112MHz Determined physical RAM map: memory: 04000000 @ 00000000 (usable) User-defined physical RAM map: memory: 04000000 @ 00000000 (usable) Zone PFN ranges: Normal 0 -> 16384 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 16384 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: mem=64M console=ttyS0,115200n8 ip=off ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes Synthesized clear page handler (25 instructions). Synthesized copy page handler (44 instructions). Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). PID hash table entries: 256 (order: 8, 1024 bytes) Console: colour dummy device 80x25 console [ttyS0] enabled Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 60896k/65536k available (2920k kernel code, 4568k reserved, 631k data, 276k init, 0k highmem) Mount-cache hash table entries: 512 net_namespace: 64 bytes NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 Time: jz_clocksource clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered Total 4MB memory at 0x3400000 was reserved for IPU Power Management for JZ io scheduler noop registered io scheduler anticipatory registered (default) LCD Select:IO_D0=0 IO_D1=0 LCD Type:LCD_AT043TN24 LCDC: PixClock:9882352 LcdClock:30545454 full_data=183, half_data scale=150 JzSOC 4.3LCD Controller driver 2.03 Console: switching to colour frame buffer device 60x34 JzSOC onchip RTC installed !!! JzSOC: char device family. NP1300 power dected registered 1.20 bill hell_is_on 000 Jz generic touch screen driver registered 2.00 JZ4740 SAR-ADC driver registered UDC starting monitor thread JZ UDC hotplug driver registered Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 2 ports, IRQ sharing disabled ▒▒▒▒▒▒50: ttyS0 at MMIO 0x0 (irq = 9) is a 16550A serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A loop: module loaded PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered NET: Registered protocol family 24 PPPoL2TP kernel driver, V1.0 pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver dm9601 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung NAND 2GiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 2369 at 0x4a0ff000 Creating 4 MTD partitions on "NAND 2GiB 3,3V 8-bit": 0x00000000-0x00300000 : "NOAH U-boot partition 0" 0x00300000-0x00500000 : "NOAH Serial partition 1" 0x00500000-0x00800000 : "NOAH Kernel partition 2" 0x00800000-0x80000000 : "NOAH ROOT FS partition 3" UBI: physical eraseblock size: 524288 bytes (512 KiB) UBI: logical eraseblock size: 516096 bytes UBI: smallest flash I/O unit: 4096 UBI: VID header offset: 4096 (aligned 4096) UBI: data offset: 8192 UBI: attached mtd3 to ubi0 UBI: MTD device name: "NOAH ROOT FS partition 3" UBI: MTD device size: 2040 MiB UBI: number of good PEBs: 4079 UBI: number of bad PEBs: 1 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 256 UBI: number of internal volumes: 1 UBI: number of user volumes: 7 UBI: available PEBs: 195 UBI: total number of reserved PEBs: 3884 UBI: number of PEBs reserved for bad PEB handling: 40 UBI: max/mean erase counter: 44/13 UBI: background thread "ubi_bgt0d" started, PID 150 jz-ohci jz-ohci.0: JZ OHCI jz-ohci jz-ohci.0: new USB bus registered, assigned bus number 1 jz-ohci jz-ohci.0: irq 3, io mem 0x13030000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb 1-1: new full speed USB device using jz-ohci and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 2 ports detected usbcore: registered new interface driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for cp2101 usbcore: registered new interface driver cp2101 drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07 drivers/usb/serial/usb-serial.c: USB Serial support registered for Edgeport 2 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Edgeport 4 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Edgeport 8 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for EPiC device usbcore: registered new interface driver io_edgeport drivers/usb/serial/io_edgeport.c: Edgeport USB Serial Driver v2.7 drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver mice: PS/2 mouse device common for all mice scankbd_init input: jzkpd as /devices/virtual/input/input0 Jz I2C ScanKBD driver load ============ffffffff========== JZ SD/MMC card driver registered usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver JzSOC On-Chip I2S controller registered (DAC: DMA(play):2/IRQ34, ADC: DMA(record):3/IRQ35) TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ##################jerry################### UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 178569216 bytes (174384 KiB, 170 MiB, 346 LEBs) UBIFS: journal size: 10452992 bytes (10208 KiB, 9 MiB, 21 LEBs) UBIFS: media format: 3 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem). Freeing unused kernel memory: 276k freed Algorithmics/MIPS FPU Emulator v1.5 init started: BusyBox v1.10.3 (2008-08-26 09:15:05 HKT) starting pid 205, tty '': '/etc/init.d/rcS' mount: mounting tmpfs on /dev/shm failed: No such file or directory Starting udevd ... udevd[234]: lookup_group: specified group 'floppy' unknown dosfsck 2.11, 12 Mar 2005, FAT32, LFN /dev/ubiblock6: 429 files, 101409/299291 clusters ##################jerry################### UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 0, volume 1, name "Settings" UBIFS: file system size: 7225344 bytes (7056 KiB, 6 MiB, 14 LEBs) UBIFS: journal size: 4644865 bytes (4536 KiB, 4 MiB, 8 LEBs) UBIFS: media format: 3 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 0 bytes (0 KiB) ##################jerry################### UBIFS: mounted UBI device 0, volume 2, name "ProgFS" UBIFS: mounted read-only UBIFS: file system size: 190955520 bytes (186480 KiB, 182 MiB, 370 LEBs) UBIFS: journal size: 10452992 bytes (10208 KiB, 9 MiB, 21 LEBs) UBIFS: media format: 3 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 0 bytes (0 KiB) ##################jerry################### UBIFS: mounted UBI device 0, volume 3, name "Data" UBIFS: mounted read-only UBIFS: file system size: 325140480 bytes (317520 KiB, 310 MiB, 630 LEBs) UBIFS: journal size: 10452992 bytes (10208 KiB, 9 MiB, 21 LEBs) UBIFS: media format: 3 (latest is 4) UBIFS: default compressor: LZO UBIFS: reserved for root: 0 bytes (0 KiB) hwclock: settimeofday() failed: Invalid argument JZ4740 USB Device Controller version: 13-Mar-2008 gadget: NP2150 USB Storage Device, version: 7 August 2007 gadget: Number of LUNs=1 g_file_storage gadget-lun0: ro=1, file: /etc/backing_file /etc/init.d/rcS: SCSI_DISK: command not found eject: can't open '/dev/sr0': No such file or directory ifconfig: SIOCGIFFLAGS: No such device ifconfig: SIOCGIFFLAGS: No such device ifconfig: SIOCGIFFLAGS: No such device ln: /var/lib/dpkg/status: File exists ln: /var/lib/dpkg/available: File exists ln: /var/lib/apt/lists/lists: File exists starting pid 378, tty '': '-/bin/sh' starting pid 379, tty '': '/bin/nice -n 0 /etc/runOpie' process '-/bin/sh' (pid 378) exited. Scheduling for restart. starting pid 397, tty '': '-/bin/sh' # killall: quicklauncher: no process killed Program Builded Time: Jun 28 2016 22:29:21 ________ ____ ._______________ ____ ______ \_____ \/_ || ____/\ _ \ / \\____ \ / ____/ | ||____ \ / /_\ \ | | \ |_> > \ | |/ \\ \_/ \ |___| / __/\_______ \|___/______ / \_____ / \/|__| \/ \/ \/ #void do_free_signal(int & fd)# not modify of the file :/Settings/locale.conf not modify of the file :/Settings/qpe.conf ******* case : QT_QWS_NP1000 **** open ts device. mod_try=1 ******* case : QT_QWS_OTHER **** the keyboard is ----------TTY------------------- lcd 3.5 arg is 0x35 lcd 3.5 arg is 0x40 lcd 3.5 arg is 0x14 lcd 3.5 arg is 0x14 full_data=183, half_data scale=200 #/etc/udev/scripts/udevdresume.sh# #/sbin/noah_net_power_manager.sh noah_net_valid# #result:0 # -----imemodule constructor completely!!!~ rmmod: g_file_storage: No such file or directory rmmod: jz4740_udc: No such file or directory umount: cannot forcibly umount /mnt/UsrDisk: Invalid argument ------ loadInputMode: libtouch-mode.so , line 70 ----fullpath=/opt/QtPalmtop/plugins/nminputmethod/libtouch-mode.so result=0x 0 ++++++++ show touch-mode widget sh: /etc/udev/scripts/mmc_test.sh: No such file or directory #void touchModeFrame::slotMenuClick(int)#1417#id:1#this:716358# #static bool NMDevices::SendMessage(NMDevices::NMDevice_ID, int)#3#1# #####cable-add####void ServerApplication::usbChange(const QString&)####### #kill -23 `fuser -m /mnt/UsrDisk`; killall -23 nflash flash dc dv sfcplayer gbcplayer nesplayer driller bomberclone mame;killall -25 ecard ;# kill: usage: kill [-s sigspec | -n signum | -sigspec] [pid | job]... or kill -l [sigspec] killall: nflash: no process killed killall: flash: no process killed killall: dc: no process killed killall: dv: no process killed killall: sfcplayer: no process killed killall: gbcplayer: no process killed killall: nesplayer: no process killed killall: driller: no process killed killall: bomberclone: no process killed killall: mame: no process killed killall: ecard: no process killed # uname -a Linux np2150.noah.com 2.6.24.3-ge6f338fc-dirty #173 PREEMPT Mon Jul 13 10:14:41 CST 2009 mips unknown # df -ha Filesystem Size Used Available Use% Mounted on rootfs 157.4M 149.4M 8.0M 95% / ubi0:rootfs 157.4M 149.4M 8.0M 95% / /proc 0 0 0 0% /proc sysfs 0 0 0 0% /sys tmpfs 0 0 0 0% /dev none 0 0 0 0% /proc/bus/usb none 0 0 0 0% /tmp ubi0:Settings 3.7M 1.5M 2.2M 39% /mnt/Settings ubi0:ProgFS 168.5M 161.5M 7.0M 96% /mnt/ProgFS ubi0:Data 288.9M 243.2M 45.7M 84% /mnt/Data devpts 0 0 0 0% /dev/pts /dev/ssfdc1 1.1G 396.1M 773.0M 34% /mnt/UsrDisk # mount rootfs on / type rootfs (rw) ubi0:rootfs on / type ubifs (rw) /proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) tmpfs on /dev type tmpfs (rw) none on /proc/bus/usb type usbfs (rw) none on /tmp type ramfs (rw) ubi0:Settings on /mnt/Settings type ubifs (rw) ubi0:ProgFS on /mnt/ProgFS type ubifs (ro) ubi0:Data on /mnt/Data type ubifs (ro) devpts on /dev/pts type devpts (rw) /dev/ssfdc1 on /mnt/UsrDisk type vfat (rw,fmask=0022,dmask=0022,codepage=cp936,iocharset=cp936) # free total used free shared buffers Mem: 61244 41912 19332 0 1180 Swap: 0 0 0 Total: 61244 41912 19332 #